There is much to love about hardwood floors. Hardwood is extremely strong and durable. Hardwood floors are famed for their ability to add significant value to homes, and are incredibly easy to maintain and clean. You cannot just install your hardwood floor and forget it. Your hardwood floor takes a lot of punishment every day, and can develop cracks and dents over time. To maintain the look and feel of your hardwood floor, you need to get it refinished every 7-10 years.
On average, homeowners pay between $1,074 and $2400 for hardwood floor refinishing. Expect to pay up to $4,000 for a complex refinishing project involving a lot of effort. If your floor covers a larger than usual area, you may get a discount on your hardwood floor installation in Atlanta.
Expect to pay between $0.50 and $3 per square foot for sanding an average 12X14 foot room (approximately $80-$500). The actual amount you will spend will primarily depend on two factors,
a)where you live, and
b)the number of passes required
Staining will cost you an additional $1-$3 per square foot. The actual cost spent will depend on the quality of stain used and your contractor’s hourly labor rate.
Recoating will cost you $1-$2 per square foot, which is quite less than refinishing. A major benefit of recoating is that you can skip sanding, which can cost hundreds of dollars. Recoating is suitable for floors with minimal scratches and gouges. Expect to pay $20-$40 per gallon for an oil-based coating. Homeowners who use a water-based coating usually pay between $25 and $50per gallon.
Expect to pay $3-$5 per square foot to get an oak floor refinished. Refinishing cost for other common types of hardwood floor such as cherry, parquet floors, and engineered hardwood is the same.
Buffing or screening a 225 squarefoot room will cost you $1-$2.50 per squarefoot. Expect to pay between $100 and $300 for polishing.
No. When refinishing a floor, you will first have to remove layers of old finish, and prepare it for new finish by smoothing out the surface.
5 hours/100 sq.ft.
Looking for a remodeling expert to sand and refinish your hardwood floor? Look no further than 1st Choice Remodel. We are a trusted remodeling expert in Atlanta. Over the years, we have helped several homeowners transform their house into a home they love. To consult a remodeling expert, call us at 678.640.2272.
Your flooring has a major impact on the aesthetic appeal of your home. You know it’s time to get a new floor when your old flooring starts exhibiting signs of moisture damage. When looking for new flooring, you will be spoiled for choice. One of the best flooring options to consider is hardwood flooring. Hardwood is famous for providing a unique look to the area of installation. Additionally, hardwood floors are strong, durable, and low-maintenance.
Before starting to work on your hardwood installation project, your remodeling contractor in Decatur will remove your furniture from the site. Many homeowners move their furniture back immediately after their hardwood floor installation project in Decatur is successfully executed. You need to avoid this mistake at all costs.
Your furniture can have sharp edges. If you move your furniture back too early, these edges can cause irreversible damage to your new hardwood flooring in Decatur, impacting both its longevity and aesthetic appeal. To prevent this from happening, wait at least 48 hours before moving your furniture back.
To ensure your furniture does not cause any long-term damage to your new hardwood flooring in Decatur, invest in inexpensive furniture bumpers and felt pads. Before starting to work on your hardwood installation project in Decatur, install bumpers and felt pads underneath your furniture. This will greatly reduce the risk of the edges of your furniture scratching the surface of the new floor. Some thicker felt pads can even reduce the noise of the furniture over the floor.
Getting the timing of moving the furniture back to the area is only half the job. To ensure flawless execution, you need to follow the below installation tips.
Before work on the project commences, finish pending home remodeling tasks, if any. This will help avoid damage to your new floor. If your new flooring will go into a room with large appliances that need rewiring, consult your electrician. If you expect a lot of sanding, stock up on tarps and masking tape to minimize the spread of dust.
When it comes to hardwood floor installation, failing to check the moisture in the floor is a cardinal sin. You cannot afford to commit this mistake. High moisture levels can damage your floor, impacting its longevity. To address this problem, ask your installation expert to inspect the area before work commences.
Floating floor and deflection can damage your floor beyond repair. To prevent this from happening, take care to prepare the subfloor. Make sure you do not have over wood just in few areas and also ensure the subfloor is properly flattened.
Hardwood floor installation is an expert’s job. Relying on an amateur for the job is a recipe for disaster. Our team at 1st Choice Remodel comprises flooring installation experts. These professionals have years of experience in executing installation projects under their belt. To talk to kitchen remodeling contractors in Atlanta, call us at 678.640.2272.
Hardwood floors not only look stylish but are also long-lasting. Additionally, hardwood is easy to maintain, which makes it the preferred choice for homes with kids and pets. Hardwood does not trap dust, which means people with allergies don’t have to think twice about getting near to areas with this kind of flooring. When choosing hardwood flooring in Dunwoody, you will have several options. Over the years, flooring companies have started offering different types of hardwood. The following are some of the top hardwood flooring options used by remodeling contractors in Atlanta to bring dull and uninspiring areas to life.
One of the main benefits of using unfinished hardwood is that you can apply a custom coating before the final finish. Once the flooring is installed and stained, several coats of protective finishing are applied. Unfinished hardwood is finished in a way that seals the seam between boards, preventing water from seeping in. Due to this property, unfinished hardwood is used extensively in kitchens. Prefinished hardwood floors are sanded and sealed in factories, which helps avoid the inconvenience (odors and VOCs) that are associated with on-site finishing. Once the floor is installed, it is ready to be walked on immediately.
Solid hardwood consists of 100 percent wood and can be sanded and refinished several times. The major downside to using solid hardwood is that it is highly susceptible to humidity, making it a poor choice for below-grade basements. Engineered hardwood, on the other hand, includes layers. While the top and bottom layers are 100 percent wood, the middle layer includes 5-7 layers of plywood. The unique structure gives engineered wood excellent stability, making it an excellent choice for any area in your home. Engineered wood, however, cannot be sanded and refinished multiple times.
Look for hardwood made with species that are readily available and very hard. Some choices to consider are oak, bamboo, cherry, and maple. If budget is not a constraint, opt for high-end species such as teak and mesquite.
These are some hardwood floor options. If you are struggling to figure out which option best suits your layout, 1st Choice Remodel would be happy to help. To discuss your hardwood floor refinishing project in Atlanta, call at 678.640.2272. To give feedback, fill out our contact form.
When you take a trip down the memory lane which memories make you smile the most? It’s often coming back home after a long day at work and watching your kids playing on the floor. Their innocence and antics whisk away all accumulated stress for the day. Apart from providing a smooth surface to walk on your floor, it becomes a part of several cherished memories, which is why you must take good care of it. Hardwood is the first choice of many homeowners when it comes to choosing between flooring options. Remodeling contractors in Dunwoody showcase several benefits of using hardwood. Solid hardwood is versatile that can withstand stain and lasts long.
However, like everything else, hardwood comes with fixed service life. When your existing floor looks discolored or damaged it indicates that it’s time to ask your kitchen remodeler in Dunwoody to install a new hardwood floor. To get things in place faster, you can consult hardwood floor installation experts in Dunwoody to refinish your existing floor. To help you plan better, we bring some of the must-know things you must be aware of before initiating work on your floor installation or refinishing project. Let’s have a look at some of them;
Installing or refinishing hardwood flooring in Dunwoody is the job of an experienced individual. Taking the DIY route will often do more bad than good, and can sometimes result in losses. When looking for a professional, it is recommended to get at least three quotes. Inquire about their experience and dust control techniques. Learn about the type of polyurethane they prefer. Before hiring a provider, contact your Contractors State License Board to ensure there are no pending claims against the company and offers worker’s compensation. If you are in Atlanta, 1st Choice Remodel ATL would be happy to help. Equipped with more than two decades of experience, we are confident about understanding your needs, however, they are unique. We provide warranties on all our jobs.
Remodelers often charge by the square foot. Their rate may vary depending on your location, the nature of the job, and your home’s accessibility. Expect to receive the payment in the range of $2.50-$5.25. This range may, however, double if there are no parking or limited options in your apartment.
Typical project length varies between 4-7 days depending on the complexity of the project and the type of hardwood you intend to use. Your kitchen remodeling contractor in Dunwoody would, for instance, may take more time to install unfinished hardwood as compared to prefinished hardwood.
While hiring a contractor for a hardwood floor installation or refinishing in Dunwoody, keep these things in mind. To get specialized remodeling and other tips talk to our experts at 1st Choice Remodel ATL. As, a premier remodeling contractor in Atlanta, we are committed to helping our customers achieve their project goals within the stipulated timelines.
The charm of hardwood flooring can only be known once you’ve experienced quality hardwood flooring in your house. At 1st Choice Remodel ATL, we offer high-quality hardwood flooring services that will meet and exceed your expectations. As a well-known hardwood flooring company, we employ professionals who have many years of experience in installing hardwood floors in all kinds of homes. Our team uses quality materials and advanced equipment to ensure that all hardwood floors are installed in the best manner. We believe that once installed, the hardwood floors should continue to look great for years to come and our team takes great pride in the work we do for our clients.
We aim to offer our customers the best hardwood flooring services at prices that won’t burn a hole in their pocket. Our expertise in hardwood flooring allows us to work with all kinds of wood and patterns as per the requirement and budget of our customers. We ensure that we provide the best quotes for the job that needs to be done and complete the project within the given time frame. Our team works professionally and they clean up after they’re done so that you can have your home as you’d left it.
To learn more about the complete range of hardwood flooring services that we provide, please browse through our website. You can also get in touch with us through the Contact Us page or give us a call at 678 6402272 and our representative will get back to you at the earliest.
Fill out the short form below. We will contact you shortly